Filter
Top Products
Installing the Base Cover
1. Align the edges of the base cover on the computer and press it on the computer until it snaps in
place.
2. Tighten the screws to secure the base cover to the computer.
3. Install the battery.
4. Follow the procedures in After Working Inside Your Computer.
Removing the Memory
1. Follow the procedures in Before Working On Your Computer.
2. Remove the:
a. battery
b. base cover
3. Perform the following steps to remove the memory module(s) from the computer:
a. Pry the retention clips away from the memory module(s) until the memory module(s) pop-up.
b. Remove the memory module(s) from the computer.
13