Filter
Top Products
Fast Boot Allows you to enable or
disable Fast boot.
Default: Enabled
Boot List Option Allows you to choose
between Legacy and
UEFI Boot options.
Default: UEFI
File Browser Add Boot Option Allows you to select the
Media Driver.
File Browser Del Boot Option Allows you to select the
File Browser Del Boot
Option
Secure Boot Allows you to enable or
disable Secure Boot.
Default: Disabled
Load Legacy Option Rom Allows you to enable or
disable Legacy Options
ROM.
Default: Enabled
Boot Option Priorities
Boot Option #1 Allows you to select the
1st boot device
preference
Boot Option #2 Allows you to select the
2nd boot device
preference
Boot Option #3 Allows you to select the
3rd boot device
preference
Exit
This section allows you to Save Changes and Reset, Discard Changes and Reset, Restore Defaults, Discard
Changes, or Save Changes before exiting from Setup Utility.
Updating the BIOS
It is recommended to update your BIOS (system setup), on replacing the system board or if an update is
available. For laptops, ensure that your computer battery is fully charged and connected to a power
outlet
1. Re-start the computer.
2. Go to dell.com/support.
3. Enter the Service Tag or Express Service Code and click Submit.
NOTE: To locate the Service Tag, click Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the
instructions on screen.
4. If you are unable to locate or find the Service Tag, click the Product Category of your computer.
37