Filter
Top Products
Installing the Hard Drive
1. Connect the hard drive cable.
2. Place the hard drive inside the computer.
3. Tighten the screw that secures the hard drive to the computer.
4. Install:
a. battery
b. base cover
5. Follow the procedures in After Working Inside Your computer.
Removing the WLAN Card
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. base cover
b. battery
3. Perform the following steps as shown in the illustration:
a. Loosen the screw that secures the WLAN card to the computer [1].
b. Lift the tab in the direction indicated [2].
c. Disconnect the cables that connect the WLAN card to the computer [3].
13