Filter
Top Products
Replacing the Camera Module | 91
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the camera module on the display back-cover.
2 Replace the screw that secures the camera module to the display back-cover.
3 Adhere the tape that secures the camera module to the display back-cover.
4 Connect the camera cable to the connector on the camera module.
Postrequisites
1 Replace the display bezel. See "Replacing the Display Bezel" on page 77.
2 Replace the display assembly. See "Replacing the Display Assembly" on page 73.
3 Replace the palm-rest. See "Replacing the Palm-Rest" on page 35.
4 Replace the keyboard. See "Replacing the Keyboard" on page 29.
5 Replace the optical-drive assembly. See "Replacing the Optical-Drive Assembly" on
page 21.
6 Replace the hard-drive assembly. See "Replacing the Hard-Drive Assembly" on
page 25.
7 Follow the instructions from step 3 and step 4 in "Replacing the Memory Module(s)"
on page 17.
8 Replace the battery. See "Replacing the Battery" on page 13.
9 Follow the instructions in "After Working Inside Your Computer" on page 9.
OM_Book.book Page 91 Tuesday, November 20, 2012 12:43 PM