Filter
Top Products
b. Battery
c. Display Bezel
3. Perform the following steps as shown in the illustration:
a. Disconnect the camera cable from the connector on the camera module [1].
b. Lift and remove the camera from the display assembly [2].
Installing the Camera
1. Connect the camera cable to the connector on the camera module.
2. Align the camera module in its position on the computer.
3. Install:
a. Display Bezel
b. Battery
c. Base Cover
4. Follow the procedures in After Working Inside Your computer.
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. Base Cover
b. Battery
c. Hard Drive
d. WLAN Card
e. System Fan
f. Keyboard
g. Base Frame
h. Heatsink
3. Perform the following steps as shown in the illustration:
a. Lift the locking tab [1].
b. Disconnect the LED and touchpad cables [2].
33