Filter
Top Products
7. Lift the display assembly up from the system and remove.
Installing the Display Assembly
1. Align the display assembly to the computer base.
2. Thread the camera cable and tighten the screw to secure the right hinge in place.
3. Tighten the screw that secure the left hinge in place.
4. Tighten the screws present below the hinge cover.
5. Tighten the screws from the base of the computer that secures the display assembly in place.
6. Install the:
a) LAN board
b) WLAN card
c) system board
d) express card reader
e) palmrest
43