Filter
Top Products
The following table shows Drive Configuration option information.
The following table shows Memory Information option information.
The following table shows CPU Information option information.
The following table shows Integrated Devices (Legacy Select Options) option information.
The following table shows Power Management option information.
Asset Tag
Displays asset tag information.
Diskette Drive A:
Sets the status of a floppy drive. The default is 3.5 inch, 1.44 MB.
SATA Primary
Drive:
If no device is attached as SATA primary drive, then Off is displayed. If a device is attached, the type of drive is displayed. If <Enter> is
pressed, device information is displayed and the drive type can be set as Auto (default) or Off.
IDE Primary Drive
0:
If no device is attached as primary drive 0, then Off is displayed. If a device is attached, the type of drive is displayed. If <Enter> is
pressed, device information is displayed and the drive type can be set as Auto (default) or Off.
IDE Primary Drive
1:
If no device is attached as primary drive 1, then Off is displayed. If a device is attached, the type of drive is displayed. If <Enter> is
pressed, device information is displayed and the drive type can be set as Auto or Off (default).
IDE Secondary
Drive 0:
If no device is attached as secondary drive 0, then Off is displayed. If a device is attached, the type of drive is displayed. If <Enter> is
pressed, device information is displayed and the drive type can be set as Auto (default) or Off.
IDE Secondary
Drive 1:
If no device is attached as secondary drive 1, then Off is displayed. If a device is attached, the type of drive is displayed. If <Enter> is
pressed, device information is displayed and the drive type can be set as Auto or Off (default).
IDE Drive UDMA:
Turns IDE Drive UDMA on and off. The default is On.
Option
Function
Installed System Memory
Displays the amount of installed system memory.
System Memory Speed
Displays the speed of your system memory.
System Memory Channel Mode
Displays the mode of your system memory.
AGP Aperture
Displays the amount of aperture memory. The default is 128 MB.
Option
Function
Hyper-Threading
Enables Hyper-Threading. The default is Disabled.
NOTE: This option is displayed only if the installed microprocessor supports Hyper-Threading.
CPU Speed
Sets the CPU speed. The default is Normal.
Bus Speed
Displays the bus speed.
Processor 0 ID
Displays processor ID.
Clock Speed
Displays clock speed.
Cache Size
Displays cache size.
Option
Function
Sound
Turns the integrated sound off and on. The default is On.
Network Interface Controller
Turns the network interface controller off and on or on with PXE support. The default is On.
Mouse Port
Turns the mouse port off and on. The default is On.
USB Emulation
Turns USB emulation off and on. The default is On.
USB Controller
Turns the USB controller off and on. The default is On.
Parallel Port
Displays parallel port settings when <Enter> is pressed. The default mode is PS/2 and the I/O address default is 378h.
Primary Video Controller
Sets the primary video controller. The default is Auto.
Onboard Video Buffer
Sets the onboard video buffer size. The default is 1 MB.
Option
Function
Suspend Mode
Displays the suspend state used by the computer. The default is S3.
AC Power Recovery
Enables AC power recovery to occur. The default is Off.