Filter
Top Products
Operating the Monitor:Dell P170S/P190S Flat Panel Monitor User's Guide
file:///S|/SSA_Proposal/P170S_P190S/UG/operate.htm[7/8/2011 4:48:31 PM]
Exit — Select to exit out of Reset to Factory Settings menu without resetting any OSD options.
Position
settings only — Change the settings for Image Position back to original factory settings.
Color settings only — Change the
Red, Green, and Blue settings back to their original factory settings and set
the default setting for Normal Preset.
All settings —
Change all the user-adjustable settings including color, position, brightness, contrast and OSD hold time to the factory defaults. The language of
the OSD does not change.
IR —
This feature will help reduce minor cases of image retention.
Enable LCD Conditioning: If an image appears to be stuck on the monitor, select LCD Conditioning to help
eliminate any image retention. Using the LCD
Conditioning feature may take several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning feature does not remove burn-in.
NOTE: Use LCD Conditioning only when you experience a problem with image retention.
Below warning message appears once user select “Enable LCD Conditioning”:
NOTE: Press any button on the monitor to terminate LCD Conditioning at any time.
DDC/CI — Enable the DDC/CI control function.