Filter
Top Products
Specifications 21
Network
10/100/1000 Mbps Ethernet LAN on the
system board.
RJ-45 port — Connect one end of a network
cable to either a network connector or your
network or broadband device. Connect the
other end of the network cable to the network
adapter connector on your computer. A click
indicates that the network cable has been
securely attached.
NOTICE: Do not plug a telephone cable
into the network connector.
On computers with an additional network
connector card, use the connectors on the
card and on the back of the computer when
setting up multiple network connections
(such as a separate intra- and extranet).
It is recommended that you use Category 5
wiring and connectors for your network. If
you must use Category 3 wiring, force the
network speed to 10 Mbps to ensure reliable
operation.
USB
Eight USB 2.0-compliant connectors
Front-panel (2)
Back-panel (4)
Top USB tray (2)
Use the back USB connectors for devices that
typically remain connected, such as printers
and keyboards.
NOTE: It is recommended that you use the
front USB connectors for devices that you
connect occasionally, such as flash memory
keys or cameras, or for bootable USB devices.
Connectors (continued) Inspiron 518/519
book.book Page 21 Wednesday, July 2, 2008 1:51 PM