Filter
Top Products
Removing the Palm-Rest Assembly | 27
4 Turn the computer over and open the display as far as possible.
5 Lift the connector latches and pull the pull-tab to disconnect the status-lights
board cable, touchpad cable, touchpad status-light cable, and the hot-key board
cable from the connectors on the system board.
1 hot-key board cable 2 status-lights board cable
3 touchpad cable 4 touchpad status-lights cable
4
1
2
3
OM_Book.book Page 27 Tuesday, May 8, 2012 2:04 PM