Filter
Top Products
PowerConnect 5500 Series Release Notes
System Firmware Version 4.1.0.1 Subject to Change Without Notice Page 3
Link issues between PC5548 and e6320
(Dell) laptop (EEE interoperability on Intel
NIC)
Link cannot be established
When EEE is disabled – Switch does
not advertise EEE capability.
When EEE is enabled – user can
determine if to work in Auto-
Negotiation slave mode to overcome
the problem
PC55xx Port-channel inconsistent
configuration in general mode
1. Whenever port is in
general mode and bind to
VLAN, an error message is
present when trying to
remove the port from the
VLAN
2. When creating a range of
VLANs, specific VLAN 3664
can not be created.
Whenever trying to create
this specific VLAN 3664 after
the failure, it still cannot be
created.
1. Removed the error message
2. All VLANs in any range or
combination is being created.
PC55xx - FATAL ERROR and crash when
changing port mode.
When changing the port
mode to access or general,
the switch crashed
Fixed the problem
PC55xx v4.0.1.0 LAG issue using 10Gb
interfaces
When using the XG ports
with SFP of 1G, can join
both ports as uplink LAG
Po1.
- If reloading the device, XG
port 1/0/2 cannot come up.
- If replacing one of the 1G
SFP with 10G SFP +, the
device will allow such an
illegal behavior
Port-Channel speed is based on the
physical ports speed that are
members of the Port-Channel
PC55xx Unable to reach Storm Control
page via GUI (Japanese Internet Explorer)
When IE is in Japanese –
Strom Control page is
missing
Fixed the problem and verified that
other web pages doesn’t suffer from
the same problem
55xx - Cannot modify port description in
GUI on active fiber-optic interface
Cannot modify port
description in GUI on active
fiber-optic interface
Fixed the problem