Filter
Top Products
20
Configuring the Switch
11
Press
Enter
.
The following information is displayed:
Finally, set up the default gateway.
Please enter the IP address of the gateway from
which this network is reachable
(e.g. 192.168.2.1).Default gateway
(A.B.C.D):[0.0.0.0]
12
Enter the default gateway.
13
Press
Enter
. The following is displayed (example):
This is the configuration information that has
been collected:
SNMP Interface = "Dell Network
Manager"@192.168.2.10
User Account setup = admin
Password = **********
Management IP address = 192.168.2.100
255.255.255.0
Default Gateway = 192.168.2.1
The following information is displayed:
If the information is correct, please select (Y)
to save the configuration and copy to the start-up
configuration file. If the information is
incorrect, select (N) to discard configuration and
restart the wizard: [Y/N]
ContaxGS.book Page 20 Friday, August 20, 2010 1:53 PM