Filter
Top Products
support.dell.com Dell PowerEdge 6300 and 4x00 Systems SCSI Backplane Option 1-3
Figure 1-1. Removing a SCSI Backplane Board
12. Install the new backplane board:
a. While holding the backplane board by its edges, position the board so that
the tabs on the computer chassis wall fit through the corresponding slots in
the backplane board.
b. Slide the backplane board toward the power-supply paralleling board (PSPB).
c. Secure the backplane board by tightening the captive screw.
13. Connect the 20-pin data cable leading from the system board to the connector
labeled "PLANAR" on the backplane board (see Figure 1-2).
1 Thumbscrew
2 SCSI backplane board