Filter
Top Products
Replacing the Power-Status
Light Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the power-light board with the screw holes on
the palm-rest assembly.
2 Replace the screws that secure the power-light board to the palm-rest
assembly.
3 Connect the power-light board cable to the power-light board and press
down on the latch to secure the cable.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
35