Filter
Top Products
Replacing the Display Cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Route the display cable through the routing guides on the display bezel.
2 Slide the display cable into the connector on the touch board and press
down the latch to secure the cable.
3 Route the camera cable through the routing guides on the display bezel.
4 Adhere the adhesive tape, connect the touch-screen board cable to the
touch-screen board and press down the connector latch to secure the
cable.
5 Slide the Windows-button board cable into the connector on the
Windows-button board and press down the latch to secure the cable.
6 Adhere the adhesive tape on the Windows-button board connector.
Post-requisites
1 Replace the display back-cover and antenna assembly.
2 Replace the display assembly.
3 Replace the camera.
4 Replace the battery.
5 Replace the base cover.
91