Filter
Top Products
Option Description
For Ultra Small Form Factor
• M-SATA
• SATA 0
• SATA 1
SMART Reporting This field controls if the hard drive errors for the integrated drives are
reported during system startup. This technology is part of the SMART (Self
Monitoring Analysis and Reporting Technology) specification.
• Enable SMART Reporting - This option is disabled by default.
USB Configuration This field configures the integrated USB controller. If Boot Support is
enabled, the system is allowed to boot any type of USB mass storage
devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available
for operation system.
If USB port is disabled, the operation system cannot see any device
attached to this port.
USB configuration:
For Mini-Tower, Small Form Factor the options are:
• Enable Boot Support
• Enable Front USB 2.0 Ports
• Enable USB 3.0 Ports
• Enable Rear—Left Dual USB 2.0 Ports
• Enable Rear —Right Dual USB 2.0 Ports (default value is enable)
NOTE: USB keyboard and mouse always work in the BIOS setup
irrespective of these settings.
Audio
Allows you to enable or disable the integrated audio controller.
• Enable Audio (enable by default)
Miscellaneous Devices Allows you to enable or disable various on-board devices. (For Mini Tower
and Ultra Small Form Factor)
• Enable PCI Slot - This option is enabled by default.
Table 4. Security
Option Description
Internal HDD_O Password This field lets you set, change, or delete the administrator (admin)
password (sometimes called the setup password). The admin password
enables several security features.
The drive does not have a password set by default.
• Enter the old password
• Enter the new password
34