Filter
Top Products
Scanning 45
Scanning to Your Computer Over a Network
1 Make sure your computer is attached to the network.
NOTE: Dell printers can only be attached to a network using a Dell Network Adapter (sold
separately).
2
Make sure your computer and printer are on.
3 Load your original document. For help, see "Load an Original Document Into the ADF" on
page 24 or "Placing Your Original Document on the Scanner Glass" on page 25.
4 From the main menu, use the up and down Arrow buttons to scroll to Scan, and
press Select .
The printer automatically detects if it is connected to a network. If it is connected to a
network, the Host Selection screen appears. If it is not connected to a network, the Scan
Mode menu appears.
5 From the Host Selection Screen, choose the computer to which you want to send the
document, and press Select .
6 Enter the four-digit PIN number specified for the host computer.
NOTE: This can be found in the upper right corner of the All-In-One Main Page. For help, see "Using
the Dell All-In-One Center" on page 73. The PIN is not required by default; it is only requested if the
PIN has been set.
7 Press Select .
The Scan Mode menu appears.