Dell AP-105 Network Card User Manual


 
8
The exact firmware versions tested were:
ArubaOS_6xx_6.1.2.3-FIPS
Dell_PCW_6xx_6.1.2.3-FIPS
2.1.1.1 Dimensions/Weight
The AP has the following physical dimensions:
120 mm x 130 mm x 35 mm (4.7" x 5.1" x 1.4")
255 g (9 oz)
2.1.1.2 Interfaces
The module provides the following network interfaces:
1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX
Antenna
o 2x RP-SMA antenna interfaces (supports up to 2x2 MIMO with spatial diversity)
1 x RJ-45 console interface
The module provides the following power interfaces:
48 V DC 802.3af power over Ethernet
12 V DC for external AC supplied power (adapter sold separately)
2.1.1.3 Indicator LEDs
There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 2- AP-92 Indicator LEDs
Label
Function
Action
Status
PWR
AP power / ready status
Off
No power to AP
Red
Initial power-up condition
Flashing Green
Device booting, not ready
On Green
Device ready
ENET
Ethernet Network Link
Status / Activity
Off
Ethernet link unavailable
On Amber
10/100Mbs Ethernet link
negotiated
On Green
1000Mbs Ethernet link negotiated
Flashing
Ethernet link activity
11b/g/n
2.4GHz Radio Status
Off
2.4GHz radio disabled
On Amber
2.4GHz radio enabled in WLAN
mode