13
ENET
Ethernet Network Link
Status / Activity
Off
Ethernet link unavailable
On – Amber
10/100Mbs Ethernet link negotiated
On – Green
1000Mbs Ethernet link negotiated
Flashing
Ethernet link activity
11b/g/n
2.4GHz Radio Status
Off
2.4GHz radio disabled
On – Amber
2.4GHz radio enabled in WLAN mode
On – Green
2.4GHz radio enabled in 802.11n mode
Flashing - Green
2.4GHz Air monitor or RFprotect sensor
11a/n
5GHz Radio Status
Off
5GHz radio disabled
On - Amber
5GHz radio enabled in WLAN mode
On – Green
5GHz radio enabled in 802.11n mode
Flashing - Green
5GHz Air monitor or RFprotect sensor
2.4 AP-175 Series
This section introduces the Aruba AP-175 series Wireless Access Points (APs) with FIPS 140-2 Level 2
validation. It describes the purpose of the AP, its physical attributes, and its interfaces.
Figure 4 - AP-175 Wireless Access Point
The Aruba AP-175 is high-performance 802.11n (2x2:2) MIMO, dual-radio (concurrent 802.11a/n + b/g/n)
indoor wireless access points capable of delivering combined wireless data rates of up to 600Mbps. This
multi-function access point provides wireless LAN access, air monitoring, and wireless intrusion detection
and prevention over the 2.4GHz and 5GHz RF spectrum. The multifunction AP-175 is an affordable, fully
hardened outdoor 802.11n access point (AP) that provides maximum deployment flexibility in high-density
campuses, storage yards, warehouses, container/transportation facilities, extreme industrial production
areas and other harsh environments.