Filter
Top Products
Back to Contents Page
Keyboard
Dell™Inspiron™1300/B120/B130ServiceManual
Removing the Keyboard
Replacing the Keyboard
Removing the Keyboard
1. Follow the instructions in Before Working Inside Your Computer.
2. Remove the hinge cover. See Removing the Hinge Cover.
3. Remove the two screws at the top of the keyboard.
4. Lift up the keyboard, and hold it up and slightly forward to allow access to the keyboard connector on the system board.
5. Lift the keyboard connector and slide out the keyboard cable.
Replacing the Keyboard
1. To replace the keyboard, connect the keyboard connector to the system board.
2. Place the tabs along the front edge of the keyboard into the palm rest and lay the keyboard down on the palmrest.
3. Replace the two screws at the top of the keyboard.
4. Replace the hinge cover. See Replacing the Hinge Cover.
CAUTION: BeforeworkinginsideyourDell™computer,readthesafetyinstructionsinyourProduct Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the keyboard into the palm rest, and
then secure the keyboard in place.
1
keyboard
2
system board connector