Filter
Top Products
Removing and Installing Parts 59
Removing the Computer Cover
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before removing the cover.
1
Follow the procedures in "Before You Begin" on page 53.
NOTICE: Ensure that sufficient space exists to support the removed cover—at least 30 cm (1 ft) of desk
top space.
NOTICE: Ensure that you are working on a level, protected surface to avoid scratching either the
computer or the surface on which it is resting.
2
Lay your computer on its side with the computer cover facing up.
3
Pull back the cover release latch located on the top panel.
computer cover
cover latch release
back of computer
bottom hinges
C7565bk1.book Page 59 Wednesday, January 26, 2005 1:37 PM