Filter
Top Products
Enhancing the Dell iSCSI SAN with Dell PowerVault
TM
Tape Libraries and Chelsio Unified Storage Router
iSCSI Appliance
tape library LUN. There are several options which can be specified such as IQN name, alias, IP address
and TCP ports. To create the tape library LUN, select the tape library from the LUN Device drop down
list and then select the IP address of the 10GbE port on the Chelsio USR you want to associate with the
tape library (Figure 6). Clicking the Create iSCSI Target button should cause the page to refresh and now
the tape library should be displayed in the navigation menu under iSCSI (Figure 7).
Figure 6 - Creating the Tape Library LUN in the Management Interface
The final step is to add the tape drives in the tape library as LUNs. This step can be repeated for as many
tape drives as you want to use in the tape library. The target alias given to the tape library LUN which
was added in the previous step should now show up in the iSCSI navigation menu. To add a tape drive
LUN, click on LUNs in the navigation menu, and then select the tape drive you want to add from the
drop down list. Click the Add Lun button to add the tape drive LUN to the configuration.
Figure 7 - Adding a Tape Drive LUN to the Tape Library iSCSI Target