Filter
Top Products
support.dell.com Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual 31
.((&
5. Turn the computer upside down on a flat work surface.
6. Remove the five 20-mm screws that secure the palmrest to the computer.
These screws, labeled with a “circle P,” are located underneath the front
edge of the computer (see Figure 19).
7. Turn the computer right-side up on the work surface.
8. Disconnect the palmrest flex cable from the touch-pad connector on the
system board (see Figure 20).
7"%)%%!
9. Carefully remove the palmrest assembly from the bottom case assembly
(see Figure 20).
palmrest assembly
touch-pad
connector
bottom case assembly
palmrest flex cable