Dell D1901Nc Computer Monitor User Manual


 
8
FRONT PANEL CONTROL
Power Button:
Press this button to switch ON/OFF of monitor’s power.
Power Indicator:
Blue Power On mode.
Orange — Power saving mode.
MENU/ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu when in
Contrast/Brightness OSD status.
ECO Hotkey(-)
ActivatestheECOcontrolwhentheOSDisOFFornavigatethrough
adjustmenticonswhenOSDisONoradjustafunctionwhenfunction
isactivated.
Image Ratio(+) :
Select monitor display mode. Press Image Ratio(+) button to change wide
mode or 4:3 mode.
Auto/Source:
1.
2. Auto configure hot key: When the OSD is closed, press Auto/Source
button continuously about 2 second to do auto configure.
3. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu).
OSD Lock Function: To lock the OSD, press and hold the MENU button
while the monitor is off and then press power button to turn the monitor on. To
unlock the OSD - press and hold the MENU button while the monitor is off
and then press power button to turn the monitor on.
NOTES
Do not install the monitor in a location near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
For maximum protection, repackage your monitor as it was originally
packed at the factory.
When the OSD is off, press Auto/Source button continuously to select the
input source showed in the message bar. Press Menu/Enter button to
change to the selected source.