Filter
Top Products
5. To install a WLAN card:
a. Move any antenna cables out of the way to make space for the WLAN card.
b. Align the WLAN card with the connector at a 45-degree angle, and press the card into the connector until you feel a click.
c. Connect the antenna cables to the WLAN card, ensuring that you route the cables correctly.
Mobile Broadband Card
If you ordered a Mobile Broadband card with your computer, the card is already installed.
1
WLAN card
2
metal securing tabs (2)
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
NOTE: Do not insert a Mobile Broadband card into the WLAN card slot.
1
WLAN card
2
antenna cable connectors
NOTICE: To avoid damaging the WLAN card, never place cables on top of or under the card.
NOTE: Your WLAN card may have two or three antenna cable connectors, depending on the type of card you ordered.
NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your WLAN card.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.