Filter
Top Products
10. From the back of the computer, remove the two M2.5 x 8-mm screws.
11. From the bottom of the computer, remove the two M2.5 x 8-mm screws labeled "D."
12. Turn the computer top-side up and open the display.
13. Lift the display assembly out of the computer base.
Removing the Display Bezel
1. Follow the instructions in Before You Begin.
2. Remove the display assembly (see Display Assembly).
3. Use a plastic scribe to pry the six rubber screw-covers/display-bumpers out of the screw holes on the front of the bezel.
1
antenna cables (2)
2
display cable pull-tab
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as a connector on the back of the computer.