Filter
Top Products
Left side Right side
Monitor Specifications
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred
to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices.The following table
shows the power consumption and signaling of this automatic power saving feature:
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption
Normal operation Active Active Active Green 38 W (typical)
Active-off mode Inactive Inactive Blanked Ambers Less than 2 W
Switch off - - - Off Less than 1 W
NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the Menu or Plus buttons are pressed when in Active-off
mode.
1 : Auto Detect (Analog Input)
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
or
1 : Auto Detect (Digital Input)
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
2: Analog Input
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
or
3: Digital Input
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
Activate the computer and the monitor to gain access to the OSD
.
This monitor is ENERGY STAR®-compliant as well as TCO '99/'03 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments