Filter
Top Products
Electrical Specifications
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input
impedance
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input
voltage/frequency/current
100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)
Inrush current
120 V: 30 A (Max.)/240 V: 60 A (Max.) (E1910)
120V:40A (Max.)/ 240V:80A (Max.) (E2210)
Physical Characteristics
Model
Dell E1910 Flat Panel Monitor
Dell E2210 Flat Panel Monitor
Connector type
15-pin D-subminiature, blue
connector; DVI-D, white
connector
15-pin D-subminiature, blue
connector; DVI-D, white
connector
Signal cable type
Digital: Detachable, DVI-D, Solid
pins, shipped detached from
the monitor
Analog: Detachable, D-Sub,
15pins, shipped attached to
the monitor
Digital: Detachable, DVI-D, Solid
pins, shipped detached from
the monitor
Analog: Detachable, D-Sub,
15pins, shipped attached to
the monitor
Dimensions (with stand)
Height (Extended)
14.32 inches (363.74 mm)
16.01 inches (406.7 mm)
Width
17.45 inches (442.85 mm)
20.13 inches (511.2 mm)
Depth
5.78 inches (146.86 mm)
6.44inches(163.9mm)
Dimensions (without stand)
Height
11.41 inches (289.75 mm)
13.15 inches (334.0 mm)
Width
17.43 inches (442.85 mm)
20.13 inches (511.2 mm)
Depth
2.32 inches (59.00 mm)
2.54 inches (64.5 mm)
Stand dimensions
Height (Extended)
11.39 inches (289.25 mm)
12.39 inches (314.7 mm)
Width
9.88 inches (250.86 mm)
10.47 inches (265.9 mm)
Depth
5.78 inches (146.86 mm)
6.44 inches (163.7 mm)
Weight
Weight with packaging
12.70 lbs (5.76 kg)
15.50 lbs (7.03 kg)
Weight with stand assembly and cables
11.11 lbs (5.04 kg)
13.27 lbs (6.02 kg)
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
7.91 lbs (3.59 kg)
9.70 lbs (4.40 kg)
Weight of stand assembly
2.20 lbs (1.00 kg)
2.58 lbs (1.17 kg)