Filter
Top Products
Installing the Modem Card
1. Place the modem card on the Input/Output (I/O) board in the computer.
2. Connect the network connector cable to the modem card.
3. Engage the modem card to the connector located at the back of the computer.
4. Tighten the screw to secure the modem card to the computer.
5. Install:
a) right support frame
b) display assembly
c) palmrest
d) right base panel
e) hard drive
f) optical drive
g) keyboard
h) keyboard trim
i) access panel
j) battery
k) SD memory card
6. Follow the procedures in
After Working Inside Your Computer
.
Removing the Left Support Frame
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) SD memory card
b) battery
c) access panel
d) keyboard trim
e) keyboard
f) optical drive
g) hard drive
h) right base panel
i) palmrest
j) display assembly
3. Remove the screws that secure the left support frame to the computer.
4. Lift the left support frame away from the computer.
36