Dell E6410 Laptop User Manual


 
Back to Removing and Replacing Parts
WLAN Card
Dell™Latitude™E6410/E6410ATGServiceManual
Removing the WLAN Card
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the ATG Port Cover (applicable on E6410 ATG computer only).
3. Remove the battery.
4. Remove the access panel.
5. Disconnect the antenna cables from the WLAN card.
6. Remove the screw that secures the WLAN card to the computer.
7. Remove the WLAN card from the computer.
Replacing the WLAN Card
To replace the WLAN card, perform the above steps in reverse order.
Back to Removing and Replacing Parts
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.