Filter
Top Products
Option Description
NOTE: This feature is only functional
when the AC power adapter is
connected. If the AC power adapter is
removed during Standby, the system
setup will remove power from all of the
USB ports to conserve battery power.
Wireless Radio Control Allows you to enable or disable the feature
that automatically switches from wired or
wireless networks without depending on
the physical connection.
Default Setting: The options Control WLAN
radio and Control WWAN radio are
selected.
Wake on LAN/WLAN This field allows the computer to power up
from the off state when triggered by a
special LAN signal or from Hibernate state
when triggered by a special wireless LAN
signal. Wake-up from the Standby state is
unaffected by this setting and must be
enabled in the operating system. This
feature only works when the computer is
connected to AC.
• Disabled — Does not allow the system
to power on when it receives a wake-
up signal from the LAN or wireless
LAN.
• LAN Only — Allows the system to be
powered on by special LAN signals.
• WLAN Only — Allows the system to be
powered on by special WLAN signals.
• LAN or WLAN — Allows the system to
be powered on by special LAN or
wireless LAN signals.
Default Setting: Disabled
ExpressCharge
Allows you to enable or disable the
ExpressCharge feature. The options are:
• Standard
• ExpressCharge
Default Setting: ExpressCharge
137