Option Description
• Legacy (Default Setting)
• UEFI
Advanced Boot Options Enable Legacy Option ROMs (enable by
default)
Date/Time Allows you to set the date and time.
Table 3. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated
network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE (Default Setting)
• Enable UEFI Network Stack - If this option
is enabled, UEFI networking protocols are
installed/available, allowing pre-OS and
early OS networking features to use any
enabled NICs. This may be used without
PXE turned on.
Parallel Port Allows you to define and set how the parallel
port on the docking station operates. You can
set the parallel port to:
• Disabled
• AT (Default Setting)
• PS2
• ECP
Serial Port Identifies and defines the serial port settings.
You can set the serial port to:
• Disabled
• COM1 (Default Setting)
• COM2
• COM3
• COM4
NOTE: The operating system may
allocate resources even if the setting is
disabled.
SATA Operation Allows you to configure the internal SATA
hard-drive controller. The options are:
• Disabled
• ATA
• AHCI
• RAID On (Default Setting)
51