Filter
Top Products
Installing the Hard Drive
1. Slide the hard-drive in its slot in the computer.
2. Tighten the screw that secures the hard-drive bracket to the hard drive.
3. Connect the hard drive cable to the hard-drive cage.
4. Place the hard-drive bracket and tighten the screw to secure the hard drive cage to the computer.
5. Connect the hard-drive cage cable to the computer.
6. Install:
a) base cover
b) battery
7. Follow the procedures in
After Working Inside Your Computer
.
Removing the Keyboard Trim
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the battery.
3. Using a plastic scribe, pry the keyboard trim to release it from the computer. Lift up to remove the keyboard trim
from the computer.
Installing the Keyboard Trim
1. Align the keyboard trim to its slot.
2. Press along the sides of the keyboard trim until it clicks in place.
16