![](http://pdfasset.owneriq.net/4/f7/4f79a31d-cce6-4e67-a9cb-743eb4f3f48b/4f79a31d-cce6-4e67-a9cb-743eb4f3f48b-bg1b.png)
1. release lever (2)
2. PERC stack-up connector
3. PERC mini blade controller
4. screws (2)
Figure 3. Removing and Installing the PERC Mini Monolithic Controller
1. release lever (2)
2. storage-controller card holder
3. storage controller card
4. battery
5. heatsink
6. touch points (2)
7. storage-controller card connector on the
system board
8. guide pins (2)
Installing The PERC Controller
To install the PERC controller:
1. Perform a controlled shutdown of the system and attached peripherals.
2. Disconnect the system from the electrical outlet and remove the system cover.
27