Filter
Top Products
Option Description
Wake on LAN/WLAN This option allows the computer to power up from the off state when
triggered by a special LAN signal. Wake-up from the Standby state is
unaffected by this setting and must be enabled in the operating system.
This feature only works when the computer is connected to AC power
supply.
• Disabled - Does not allow the system to power on by special LAN
signals when it receives a wake-up signal from the LAN or wireless
LAN. (Default Setting)
• LAN Only - Allows the system to be powered on by special LAN
signals.
• WLAN Only
• LAN or WLAN
Block Sleep Allows you to block the computer from entering into the sleep state.
Option is disabled by default.
• Block Sleep (S3)
Peak Shift Allows you to set the peak shift. The option is disabled by default.
Advanced Battery Charge
Configuration
Allows you to enable the advance battery charge mode. The option is
disabled by default.
Primary Battery Charge
Configuration
Allows you to define how to use the battery charge, when AC is plugged
in. The options are:
• Adaptive (Default Setting)
• Standard
• Express Charge
• Primarily AC use
• Custom
Battery Slice Charge
Configuration
Allows you to define the how to charge the battery. The options are:
• Standard Charge
• Express Charge (Default Setting)
Module Bay Battery Charge
Configuration
Allows you to define how to charge the battery at standard rate. The
options are:
• Standard
• Express Charge (Default Setting)
NOTE: Disable the Advanced Battery Charge Mode in order to
enable this opiton.
Intel(R) Smart Connect
Technology
Allows you to enable the system to sense nearby wireless connection
while the system is asleep. The option is disabled by default.
Table 9. POST Behavior
Option Description
Adapter Warnings Allows you to activate the adapter warning messages when certain
power adapters are used. The option is enabled by default.
60