Filter
Top Products
16 Getting Started With Your System
Switch
System identification button Located on the front control panel.
This button is used to locate a system
within a rack.
Enclosure mode switch Located on the front of the system.
This switch is not applicable to the
PowerVault MD32xx RAID enclosure.
Password reset switch Located on the back-panel of the RAID
controller module. This switch is used to
reset the storage array password.
Power Supplies
AC power supply (per power supply)
Wa tt ag e
600 W
Voltage
100–240 VAC (8.6 A–4.3 A)
Heat dissipation
100 W
Maximum inrush current
Under typical line conditions and over the
entire system ambient operating range,
the inrush current may reach a maximum of
55 A per power supply for 10 ms or less.
Available Hard Drive Power (Per Slot)
PowerVault MD3200 25 W
PowerVault MD3220 12 W
RAID Controller Module Power (Per Slot)
Maximum power consumption 100 W
Physical
PowerVault MD3200
Height
8.68 cm (3.41 inches)
Width
44.63 cm (17.57 inches)
Depth
60.20 cm (23.70 inches)