![](http://pdfasset.owneriq.net/a/b6/ab617db4-86e5-41ef-a07e-b0ea51a12cb5/ab617db4-86e5-41ef-a07e-b0ea51a12cb5-bg13.png)
4 Align the notches on the memory card with the ridges on the connector.
1
Notches
2
Ridges
5 Push the memory card straight into the connector until it snaps into place.
6 Replace the system board cover and close the system board door.
Installing a flash memory or firmware card
Note: This task requires a flathead screwdriver.
Additional printer setup
19