Filter
Top Products
Replacing the Wireless Mini-Card
1. Follow the instructions in Before You Begin.
2. Remove the new wireless Mini-Card from its packaging.
3. Insert the wireless Mini-Card connector at a 45-degree angle into the connector on the system board.
4. Press the other end of the wireless Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the connector
on the system board.
5. Connect the black antenna cable to the connector marked with a black triangle on the wireless Mini-Card.
6. Replace the keyboard (see Replacing the Keyboard).
7. Replace the battery (see Replacing the Battery).
8. Install the drivers and utilities for your computer, as required.
Back to Contents Page
CAUTION: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system
board, and realign the card.
CAUTION: To avoid damage to the wireless Mini-Card, never place cables under the card.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
NOTE: If you are installing a wireless Mini-Card from a source other than Dell, you must install the appropriate drivers and utilities.