Filter
Top Products
14. Remove the display panel from the computer.
Installing the Display Panel
1. Connect the display cable to the display panel and attach the adhesive tape
to secure the connection.
2. Connect the low-voltage differential signalling (LVDS) cable to the display
panel.
3. Replace the adhesive tape that secures the LVDS connection to the display
panel.
4. Align the display panel in its original position on the display assembly.
5. Tighten the screws to secure the display panel to the display assembly.
6. Install the
display bezel
.
7. Install the
display assembly
.
8. Install the
Wireless Wide Area Network (WWAN) card
.
9. Install the
Wireless Local Area Network (WLAN) card
.
10. Install the
palm rest
.
11. Install the
keyboard
.
12. Install the
base cover
.
13. Install the
battery
.
14. Follow the procedures in
After Working Inside Your Computer
.
41