Filter
Top Products
Installing the WWAN Card
1. Place the WWAN card into its slot on the computer.
2. Tighten the screw to secure the WWAN card to the computer.
3. Connect the WWAN cables to their connectors on the WWAN Card.
4. Install the base cover.
5. Follow the procedures in After Working Inside Your Computer.
Removing the Display-Hinge Brackets
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. base cover
b. battery
c. memory
d. hard-drive assembly
e. keyboard trim
f. keyboard
g. palmrest
3. Remove the screws that secure the display-hinge brackets to the back of the computer.
4. Open the display and perform the following steps:
a. Remove the screws that secure the display-hinge brackets to the front of the computer [1].
b. Pull the display-hinge brackets to remove from the computer [2].
26