Filter
Top Products
Dell PowerConnect™ Firmware CLI Transition Guide
April 6, 2011 Page 8
Updated Commands – Command Mode Modifications
Feature Previous Implementation Dell™ PowerConnect 4.x
Implementation
Comments
ARP arp timeout seconds arp timeout seconds In the revised implementation,
the command is supported in both
Global Configuration Mode and
Interface Configuration Mode,
while previous implementation
supported only Global
Configuration Mode.
Banner banner motd banner motd <message> The command mode was changed
from Privileged EXEC to Global
Configuration.
DHCP
Snooping
show ip dhcp snooping show ip dhcp snooping The command mode was changed
from Privileged EXEC to User
EXEC and Privileged EXEC.
DHCP
Snooping
show ip dhcp snooping
database
show ip dhcp snooping
database
The command mode was changed
from Privileged EXEC to User
EXEC and Privileged EXEC.
DHCP
Snooping
show ip dhcp snooping
statistics
show ip dhcp snooping
statistics
The command mode was changed
from Privileged EXEC to User
EXEC and Privileged EXEC.
Ethernet
Configuration
interface range ethernet
{port-range | all}
Interface range {port-
range|port-type all}
It is no longer necessary to exit
Interface Configuration mode to
execute this command.
IGMP
Snooping
ip igmp snooping ip igmp snooping vlan vlan-id In Dell™ PowerConnect, the
command was modified from
VLAN Interface Configuration
Mode command to Global
Configuration Mode command
that includes the VLAN ID as a
parameter.
IGMP
Snooping
ip igmp snooping leave-time-
out [time-out|immediate-
leave]
ip igmp snooping leave-time-
out [time-out|immediate-
leave]
Changed the leave-time-out range
to 1-3174 seconds.
IP Addressing ip address n/a There is no longer an ip address
command in Global Config mode
due to the deprecation of support
for the management interface
(i.e., network port).
IP Routing show ip protocols show ip protocols The command mode was changed
from Privileged EXEC to Privileged
EXEC and User EXEC.
IP Routing show ip route summary [all] show ip route summary [best] The command mode was changed
from Privileged EXEC to Privileged
EXEC and User EXEC.