Dell PCM6220 Switch User Manual


 
Dell PowerConnect™ Firmware CLI Transition Guide
April 6, 2011 Page 18
Deprecated Commands
Feature Previous Implementation Dell™ PowerConnect 4.x Implementation
802.1x dot1x system-auth-control This command is changed to dot1x system-auth-control
monitor.
Address
Table
bridge address This command is changed to mac address-table static.
Address
Table
bridge aging-table This command is changed to mac address-table aging-
time.
Address
Table
bridge multicast address This command is changed to mac address-table
multicast static.
Address
Table
bridge multicast filtering This command is changed to mac address-table
multicast filtering.
Address
Table
bridge multicast forbidden
address
This command is changed to mac address-table
multicast forbidden address.
Address
Table
bridge multicast forbidden
forward-unregistered
This command is changed to mac address-table
multicast forbidden forward-unregistered.
Address
Table
bridge multicast forward-all This command is changed to mac address-table
multicast forward-all.
Address
Table
bridge multicast forward-
unregistered
This command is changed to mac address-table
multicast forward-unregistered.
Address
Table
clear bridge This command is changed to clear mac address-table.
Address
Table
mac address-table static
drop
This command has been removed. Refer to the Address
Table Commands section in the CLI Reference Guide.
Address
Table
port security trap This command is deprecated by the snmp-server enable
traps maclock command.
Address
Table
show bridge address-table This command is changed to show mac address-table.
Address
Table
show bridge address-table
count [vlan vlan | ethernet
interface-number | port-
channel port-channel-
number]
This command is changed to show mac address-table
count.
Address
Table
show bridge address-table
[vlan vlan] [ethernet
interface | port-channel
port-channel-number]
This command is changed to show mac address-table
interface and show mac address-table vlan.
Address
Table
show bridge address-table
static
This command is changed to show mac address-table
static.
ARP clear counters ip arp
inspection
clear ip arp inspection statistics
ARP show ip arp inspection
ethernet
show ip arp inspection