Filter
Top Products
Back to Contents Page
TV Tuner Card (Optional)
Dell™Inspiron™1010ServiceManual
Removing the TV Tuner Card
Replacing the TV Tuner Card
Removing the TV Tuner Card
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the keyboard (see Removing the Keyboard).
4. Remove the palm rest (see Removing the Palm Rest).
5. Remove the hard drive (see Removing the Hard Drive).
6. Remove the palm rest bracket (see Removing the Palm Rest Bracket).
7. Remove the 3-in-1 Media Card Reader (see Removing the Media Card Reader).
8. Disconnect the three TV tuner card cables from the connectors on the TV tuner card.
9. Release the TV tuner card by removing the two screws that secure the card to the system board connector.
10. Lift the TV tuner card out of the system board connector.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
NOTE: The availability of the TV tuner card varies according to region.
1
TV tuner card cables (3)
2
TV tuner card
3
screws (2)