Filter
Top Products
Dell UPS Local Node Manager
USER'S GUIDE EXTENSION FOR MICROSOFT VIRTUAL ARCHITECTURES
Dellups.com
Dell ULNM - User guide extension - HyperV R1 & R2
rev0.01
CHAPTER: Installation
10
2.3. DELL HARDWARE ARCHITECTURE
The prerequisites for Dell UPS Local Node Manager installation are described in the "Dell UPS Local
Node Manager – User Guide" chapter: “Installation Prerequisites“. (http://www.dellups.com/)
For UPS systems compatibility, please refer to the chapter “Appendix -> Compatibility List”
2.4. NETWORK ARCHITECTURE
All hardware elements must have an operational network configuration that allows free dialog
amongst each other.
Connections through the following ports must be authorized within the firewall of the main
operating system:
Connections on tcp port 4679 and 4680 to enable a remote access for supervision and
configuration through Web Browser. These ports are reserved at IANA
(http://www.iana.org/).
Connections through TCP port 80 must be opened as a destination port (for output) on the
machine hosting Dell UPS Local Node Manager. (To enable communication between Dell
UPS Local Node Manager and Network Management Card).
To configure network parameters of the main operating system, please refer to its user manual.
2.5. INSTALLING DELL ULNM ON HYPER-V SERVER R1 & R2 AND WINDOWS SERVER
2008 R2 (HYPER-V MANAGER)
Download the latest version of Dell UPS Local Node Manager Windows version package from
Dell’s website : http://www.dellups.com/ and choose the version windows of Dell ULNM
Copy the package on your system.
Execute the package from the DOS Windows command and Go to the directory where you
placed Dell UPS Local Node Manager.