Filter
Top Products
46 Using Your Projector
PASSWORD—When Password Protect is enabled, a Password Protect screen
requesting you to enter a password will be displayed when the power plug is
inserted into the electrical outlet and the power for the projector is first
turned on. By default, this function is disabled. You can enable this feature
by selecting Enabled. If the password has been set before, key in the
password first and select the function. This password security feature will
be activated the next time you turn on the projector. If you enable this
feature, you will be asked to enter the projector's password after you turn
on the projector:
1
First time password input request:
d
Go to
Others
menu, press and then select
Password
to
Enable
the password setting.
e
Enabling the Password function will pop up a character screen, key
in a 4-digit number from the screen and press .
f
To confirm, enter the password again.
g
If the password verification is successful, you may resume with
accessing the projector's functions and its utilities.