Dell S300W Projector User Manual


 
Using Your Projector 53
In order to use your projector wirelessly, you need to complete the steps below:
1
Install the wireless antenna. See "Installing the Antenna" on page 10.
2
Enable wireless connection on the projector. See "WIRELESS / NETWORK"
on page 43.
3
Set the Input Select menu then select the Multiple Display to Wireless display.
See "INPUT SELECT" on page 35. The
Wireless Guide Screen
shown below
appears:.
4
Take note of the
LOGIN CODE
,
NETWORK NAME
(
SSID)
, and
IP
ADDRESS
. You will need these information to login later.
5
Connect your computer to the
S300w
network.