Filter
Top Products
Platform Guide 1-7
4600 PCI slot 1 is 32 bit,
33 MHz.
Bus 1: PCI/PCI-X
slots 2 and 3 are
hot-pluggable
64 bit, up to
100 MHz.
Bus 2: PCI/PCI-X
slots 4 and 5 are
hot-pluggable
64 bit, up to
100 MHz.
Bus 3: PCI/PCI-X
slots 6 and 7 are
hot-pluggable
64 bit, up to
100 MHz.
Install in any available
64-bit, 33-MHz or 32-bit,
33-MHz PCI slot.
Install in any available PCI slot. If you are currently
using a DRAC III
or plan to use one
in the future,
install the DRAC
III in PCI slot 1.
6400 Bus 1: PCI slot 1 is
32 bit, 33 MHz.
Bus 2: PCI slots 2
through 5 are
64 bit, 33 MHz.
Bus 3: PCI slots 6
and 7 are 64 bit,
33/66 MHz.
Install in any available
32-bit, 33-MHz or 64-bit,
33-MHz PCI slot.
Install in any available PCI slot.
Dell recommends installing Emulex
cLAN adapters in 64-bit slots.
If you are currently
using a DRAC II
or plan to use one
in the future,
install the DRAC
II in PCI slot 1.
6450 Bus 1: PCI slot 1 is
32-bit, 33 MHz.
Bus 2: PCI slots 2
through 5 are
64 bit, 33 MHz.
Bus 3: PCI slots 6
and 7 are 64 bit,
33/66 MHz.
Install in any available
32-bit, 33-MHz or 64-bit,
33-MHz PCI slot.
Install in any available PCI slot.
Dell recommends installing Emulex
cLAN adapters in 64-bit slots.
If you are currently
using a DRAC II
or plan to use one
in the future,
install the DRAC
II in PCI slot 1.
Table 1-3. PCI/PCI-X Slot Assignments for PowerEdge Cluster Nodes
(continued)
PowerEdge
System
PCI Buses RAID Controller NICs DRAC II or III