Filter
Top Products
Base Cover
Removing The Base Cover
1. Follow the procedures in Before Working On Your Computer.
2. Remove the Secure Digital (SD) Card.
3. Remove the screws that secure the base cover to the computer.
4. Slide the base cover towards the front of the computer. Lift it up and away from the computer.
NOTE: To replace the base cover see, Installing The Base Cover.
Installing The Base Cover
NOTE: To remove or locate the base cover, see Removing The Base Cover .
1. Slide the base cover to align the screw holes correctly with the computer.
2. Tighten the screws that secure the base cover to the computer.
3. Install the Secure Digital (SD) card.
4. Follow the procedures in After Working Inside Your Computer.
11