Filter
Top Products
-
5
-
4. Remove the panel from the available 3.5” bay.
5. Insert the drive into the bay and screw it to the housing.
6. Remove the slot holder from the available PCI slot.
7. Insert the card straight and carefully into the free PCI slot, until it is well
seated.
8. Use a screw to attach the card to the housing.
9. Reattach the housing, and connect the power cord to the AC adapter.
Note: Should your computer not start, please update the BIOS firmware. For
more information please contact your mainboard manufacturer.
Driver Installation
Windows 2000/XP/XP-64/Server 2003
1. Switch on your computer.
2. The PCMCIA drive will be recognized and you can start using the device
immediately.
Windows 98SE/ME
1. Switch on your computer.
2. Afterwards, Windows displays the Hardware wizard.
3. Click on "Next".
4. Select the "CD drive" option and click on "Next".
5. The driver will be located.
6. The hardware assistant needs your Windows ME or 98 CD. Put the CD in
the CD-ROM drive and click "OK".
7. Click on "Finish".
8. Restart your PC.
9. After restart you can start using the device immediately.