Powerful Solutions for Digital Plants
MYNAH Technologies 504 Trade Center Blvd. Chesterfield, MO 63005 Telephone 636 681-1555 Fax 636 681-1660
www.mynah.com
1
1 INTRODUCTION
1.1 Scope
This document is the User Manual for the Allen Bradley serial communication driver
firmware for the Emerson DeltaV Control System; it provides information required to install,
configure, and maintain the Allen-Bradley driver firmware on the DeltaV Programmable
Serial Interface Card (PSIC). The reader should be familiar with the DeltaV controller
system and the Allen-Bradley PLC-5 Family of Programmable Logic Controllers, the Allen-
Bradley SLC-500 Family of Serial Logic and/or Controllers Allen-Bradley PLC-3 Family of
Programmable Logic Controllers.
A DeltaV Programmable Serial Interface Card with the Allen-Bradley driver may
communicate with the Allen-Bradley PLC-5 Family of Programmable Logic Controllers, the
Allen-Bradley SLC-500 Family of Serial Logic Controllers and/or Allen-Bradley PLC-3 Family
of Programmable Logic Controllers within the constraints delineated herein. In general for
driver version 1.0, the Allen-Bradley family of SLC-500’s can communicate using the same
command set used to communicate with the PLC-5 family. The SLC5/01 communicates
via the PLC2 basic commands, so only file N9 can be accessed with the SLC5/01. For
driver version 1.1, a specific command type was added to read/write SLC5/XX Input and
Output tables. The previous release of the driver, version 1.4, expands on the SLC
specific command to read/write all SLC tables. Additionally, this version allows you to
select communications using Half Duplex/CRC. Note that the default is Full Duplex/BCC.
This release, version 1.7, provides support for PLC-3 file read and write, and ControlNet
extra hop addressing when using the Allen Bradley 1770-KFC15 gateway device.
The section Document Format briefly describes the contents of each section of this manual.
System Specifications outlines hardware and software requirements for the Allen-Bradley
Driver (P1.7) firmware. Related Documents lists other documents used to prepare this
manual.